ArtikelIllustration of Capacity Fading Factors on the Example of La2(Li0.5Ni0.5)O4‐Modified High Nickel Layered Oxide Materialvon Irina A. et al. · 10.03.2023 (Ir)reversible capacity fading: New type of plots illustrate the influence of two kinds of degradation factors on the capacity retention of NCM cathode material with high Ni content. La2(Li0.5Ni0.5)O4-surface modification of bare powder suppresses i...
ArtikelInsights in Utilizing NiCo2O4/Co3O4 Nanowires as Anode Material in Lithium‐Ion Batteriesvon Anubha Tomar et al. · 10.03.2023 Transition metal oxide anode: This study is of mainly to shed the light on the research of ternary transition metal oxide nanocomposite materials for lithium-ion batteries. It also navigates the direction of research in improving the electrochemical...
ArtikelUnravelling Charge Storage Mechanisms of Lithium, Sodium and Potassium into Graphene‐Coffee Waste Derived Hard Carbon Compositesvon Juan Luis et al. · 10.03.2023 How the metal ions inserted: The insertion storage of lithium, sodium and potassium ions in a graphene-biowaste derived hard carbon are studied by operando XRD and GITT techniques, revealing that alkaline metal ions follow an adsorption-intercalatio...
ArtikelSulfur‐Composites Derived from Poly(acrylonitrile) and Poly(vinylacetylene) – A Comparative Study on the Role of Pyridinic and Thioamidic Nitrogenvon Julian Kappler et al. · 10.03.2023 Nitrogen-rich S-host: Sulfurized poly(vinylacetylene) was synthesized with analogous molecular characteristics as sulfurized poly(acrylonitrile) and taken as a template for a comparative study to investigate the influence of embedded nitrogen in a c...
ArtikelPyrolysis of Schiff‐Base Manganese Clusters: Effect of Ligand Modulation on the Performance of Supercapacitor Electrodesvon Jianing Li et al. · 10.03.2023 The ligand modulation on pyrolytic residual via constructed two trinuclear manganese clusters based on nitrogen-rich Schiff-base pentadentate ligands, are discussed systematically. This hierarchical analysis successfully clarifies the collapse way o...
ArtikelOn the Reversible Sodium Plating/stripping Reaction in Porous SiCN(O) Ceramic: A Feasibility Studyvon Marco Melzi et al. · 10.03.2023 Highly porous anodic matrix for Na-plating/stripping: The porosity of SiCN(O) makes this ceramic attractive as a matrix for reversible plating of metallic sodium on the anodic side. The pores serve as an energetically favourable nucleation site redu...
ArtikelPhase Transformation of VO2/rGO Composites as High‐Voltage Cathodes in Zinc‐Ion Batteriesvon Yuying Li et al. · 10.03.2023 The VO2/rGO cathode for ZIBs: The VO2/rGO compound structure with rGO promotes the fast electron/ion transport and stability simultaneously. It is found that the irreversible phase transition from VO2/rGO composite to Zn3(OH)2V2O7 ⋅ 2H2O/rGO (T-VO2/...
ArtikelOperational Validation of a Power Distribution Algorithm for a Modular Megawatt Battery Storage Systemvon Lucas Koltermann et al. · 10.03.2023 Large-scale battery storage systems (BESS) with multiple different battery units need an energy mangement system (EMS) including a power distribution algorithm (PDA) to function properly. In this work a staged rule-based power distribution algorithm...
ArtikelHigh‐Performance Zinc‐Ion Battery Enabled by Tuning the Terminal Group and Chain Length of PEO‐based Oligomersvon Min Yu et al. · 10.03.2023 Searching for the best: By studying how the terminal group and chain length of PEO-base oligomers affect the electrochemical performance of the oligomer-water co-solvent electrolytes, we obtained the optimized co-solvent electrolyte for zinc-ion bat...
ArtikelUnraveling the Influence of Li+‐cation and TFSI−‐anion in Poly(ionic liquid) Binders for Lithium‐Metal Batteriesvon Rafael Del et al. · 10.03.2023 Spot the better binder! This work presents the impact of using different types of poly(ionic liquid) polymers as binders in LiFePO4 cathodes, where PMTFSI−Li binder exhibits the highest discharge capacities and more homogeneous plating of lithium in...
ArtikelRevisiting the Relation Between the Stability of the LUMO of the Electrolytes and the Kinetics of Solid Electrolyte Interface Formation in Lithium‐ and Post‐Lithium‐ion Batteriesvon Mithun C. et al. · 10.03.2023 Understanding the mechanism of formation and the structure of SEI is crucial for developing high-performance batteries. In this context, it is crucial to identify critical reactivity descriptors that can bring light to the kinetics of SEI formation....
ArtikelNanostructuring Strategies for Silicon‐based Anodes in Lithium‐ion Batteries: Tuning Areal Silicon Loading, SEI Formation/Irreversible Capacity Loss, Rate Capability Retention and Electrode Durabilityvon Mariam Ezzedine et al. · 10.03.2023 Combined merits of SiNPs and VACNTs. A hybrid nanostructured anode based on SiNPs anchored on VACNTs with defined spacing to accommodate volumetric changes of SiNPs. The cycling stability and the SEI formation of SiNPs@VACNTs is studied by tuning th...
Artikelβ‐Ketoenamine‐Linked Covalent Organic Framework with Co Intercalation: Improved Lithium‐Storage Properties and Mechanism for High‐Performance Lithium‐Organic Batteriesvon Han Wang et al. · 10.03.2023 Coordination strategy has been adopted to fabricate the Co ion intercalated two-dimensional COF composite, which delivers improved lithium-storage performances and mechanism as the anode for lithium-organic batteries. Abstract As a new kind of cry...
ArtikelA Highly Reversible Aqueous Ammonium‐Ion Battery based on α‐MoO3/Ti3C2Tz Anodes and (NH4)xMnO2/CNTs Cathodesvon Li Yang et al. · 10.03.2023 Aqueous ammonia ion batteries (AAIBs) using α-MoO3/Ti3C2T z films as anodes, and (NH4) x MnO2/CNTs films as cathodes in a 1 M ammonium acetate electrolyte were reported. At 2 V, the operating cell voltage is one of the highest reported for AA...
ArtikelHierarchical Carbon Nanosheet Embedded MnOx Cathode for High‐Performance Aqueous Zinc‐Ion Batteriesvon Shimeng Zhang et al. · 10.03.2023 Hierarchical structures with defects: A novel hierarchical carbon nanosheet embedded MnO x cathode, based on 3D carbon networks (CNs) and non-stoichiometry MnO x with abundant defects (MnO x /CNs), boosts high energy density storage for a...
ArtikelIsomeric Triptycene Triquinones as Universal Cathode Materials for High Energy Alkali Metal Batteriesvon Hyunji Park et al. · 10.03.2023 Which isomer is better? To increase the redox voltages of triptycene tribenzoquinone (TT) maintaining its high specific capacity, the ortho isomers of TT(o-TT) were designed by changing their carbonyl group position. Due to multi-electron redox reac...
ArtikelUnraveling Factors Affecting Performance of Quinone‐based Polymer Cathode in Aqueous Zinc‐Ion Batteryvon Xiao Yang et al. · 10.03.2023 Quinone polymer ZIB cathode: Three different dihydroxynaphthalene (DHN) monomers are electrodeposited onto mesoporous activated carbon coatings to make cathodes for aqueous zinc-ion batteries. These polymer/carbon composite cathodes vary in terms of...
ArtikelFront Cover: Nanostructuring Strategies for Silicon‐based Anodes in Lithium‐ion Batteries: Tuning Areal Silicon Loading, SEI Formation/Irreversible Capacity Loss, Rate Capability Retention and Electrode Durability (Batteries & Supercaps 3/2023)von Mariam Ezzedine et al. · 10.03.2023 The Front Cover illustrates the hierarchical hybrid nanostructured electrode composed of vertically aligned carbon nanotubes decorated with silicon nanoparticles as anode for the next generation lithium-ion batteries. More information can be found i...
ArtikelCover Feature: Isomeric Triptycene Triquinones as Universal Cathode Materials for High Energy Alkali Metal Batteries (Batteries & Supercaps 3/2023)von Hyunji Park et al. · 10.03.2023 The Cover Feature illustrates two isomers of triptycene tribenzoquinone as universal cathode materials for alkali metal rechargeable batteries. By changing the position of their carbonyl groups from para- to ortho-position, the redox potentials are ...
ArtikelCover Feature: On the Reversible Sodium Plating/stripping Reaction in Porous SiCN(O) Ceramic: A Feasibility Study (Batteries & Supercaps 3/2023)von Marco Melzi et al. · 10.03.2023 The Cover Feature shows a Sodium Metal Battery (SMB) and the possible application as a renewable energy storage system. The polymer-derived ceramic SiCN(O) used as an anode in this system acts as a porous matrix for plating/stripping of metallic Na....
ArtikelLithium‐Ion Batteries: Nomenclature of Interphases with Liquid or Solid‐State Electrolytesvon N. Amponsah et al. · 10.03.2023 The nomenclature problem of the interphases in lithium-ion batteries is critically addressed in this perspective. The missing international consensus on the nomenclature of interphases needs to be dealt with considering the paramount role of lithium...
ArtikelReview on Cathode Materials for Sodium‐ and Potassium‐Ion Batteries: Structural Design with Electrochemical Propertiesvon Hyunyoung Park et al. · 10.03.2023 Promising alternatives to Li-ion batteries: This review provides comprehensive information on the cathode material studies reported to date for Na-ion and K-ion batteries, with a particular focus on the various strategies of each cathode material to...
ArtikelSodium Composite Oxide Cathode Materials:Phase Regulation, Electrochemical Performance and Reaction Mechanismvon Xu Zhu et al. · 10.03.2023 Towards high performance cathode materials: In this review, we have systematically summarized the recent progress of sodium composite oxide cathode materials from the perspectives of phase regulation, electrochemical performance and reaction mechani...
ArtikelCoordination Manipulation of Single Atom Catalysts for Lithium‐Sulfur Batteries: Advances and Prospectsvon Haorui Zhao et al. · 10.03.2023 This review summarizes recent advances and proposes possible directions with respect to the coordination modulation of single atom catalysts, aiming to guide the rational construction of efficient lithium-sulfur batteries and propel the understandin...
ArtikelResearch in Electrochromic Supercapacitor – A Focused Reviewvon Tae Gwang et al. · 10.03.2023 Electrochromic supercapacitor has received much attention, due to its fascinating electrochemical and optical properties. This review paper presents a comprehensive summary on the progress and state-of-the-art electrochromic supercapacitor and futur...
ArtikelGraphene‐Encapsulated Nitrogen‐doped Carbon@Bi Enables Rapid, Ultrahigh and Durable Sodium Storagevon Meixue Wang et al. · 20.03.2023Bismuth (Bi) has promising applications as anode in sodium ion batteries (SIBs) due to its suitable alloy voltage, unique lattice structure and high volumetric specific capacity. However, the severe structural degradation and poor cycling performance...
ArtikelSb ultra‐small nanoparticles embedded within N, S co‐doped flexible carbon nanofiber films with longitudinal tunnels as high performance anode materials for sodium ion batteriesvon Jie You et al. · 18.03.2023The limited theoretical specific capacity and poor rate performance of carbon-based anode seriously affect its practical applications in sodium ion batteries. Simply adjusting the morphological or component cannot solve all problems efficiently. In ...
ArtikelHybrid Aqueous/Non‐aqueous Electrolytes for Li‐ion and Zn‐ion Batteries: A Mini‐reviewvon Canfu Zhang et al. · 17.03.2023In recent years, the development of aqueous lithium-ion batteries and aqueous zinc-ion batteries has received extensive attention thanks to the advantages of high safety, environmental friendliness, and easy assembly conditions. However, aqueous batt...
ArtikelToward highly reliable K‐ion half and full coin cellsvon Badre Larhrib et al. · 15.03.2023To develop high energy and high power potassium-ion batteries (KIBs), performance need to be evaluated in full-cells instead of half-cells based on the highly reactive K metal that leads to misinterpretation of the results. However, assembling KIBs f...
ArtikelFracture Testing of Li‐ion Battery Cathode Secondary Particles In‐situ inside the Scanning Electron Microscopevon Laura Wheatcroft et al. · 15.03.2023Fracture of secondary cathode particles is a critical degradation mechanism in lithium-ion batteries. The microindentation strength of LiNi0.8Mn0.1Co0.1O2 secondary particles is measured in-situ in the scanning electron microscope (SEM), enabling dyn...
ArtikelA Composite of Nb2O5 and MoO2 as a High‐Capacity High‐Rate Anode Material for Li‐ion Batteriesvon Evangeline et al. · 13.03.2023A composite of Nb2O5 and MoO2 was synthesised using a hydrothermal reaction (225 °C) followed by a short heat-treatment step (600 °C) to achieve a high-capacity, high-rate anode for Li-ion battery applications. The composite was shown via powder X-ra...
ArtikelSolid‐State Batteries Based on Organic Cathode Materialsvon Xiaotang Gan et al. · 10.03.2023 Solid-sate organic batteries: The combination of organic cathode materials (OCMs) and solid-state batteries (SSBs) provides not only the final solution to the OCMs’ dissolution problem and reliance on lithium/sodium metal anode, but also new opportu...
ArtikelModeling of Magnesium Intercalation into Chevrel Phase Mo6S8: Report on Improved Cell Designvon Janina Drews et al. · 10.03.2023 Optimizing the Cell Design of Magnesium Batteries: A new continuum model of a Mg-ion battery sheds light into limiting processes especially competing transport limitations in the electrolyte and Chevrel Phase. The impact of the cathode morphology is...
ArtikelPolyoxometalates (POMs) with Ion/Electron‐Sponge Properties and Abundant Active Sites as Emerging Electrode Materials for Secondary Batteries: A Reviewvon Jinkun Wang et al. · 09.03.2023 Polyoxometalates (POMs) with ion/electron-sponge properties and abundant active sites are emerging electrode materials of secondary batteries, showing high capacity, remarkable rate performance and satisfactory catalytic performance. In this paper, ...
Artikel(Localized) Highly Concentrated Electrolytes for Calcium Batteriesvon Pierre‐Alexandre Martin et al. · 09.03.2023 The concept of (localized) highly concentrated electrolytes is for the first time investigated as a way to create calcium conducting electrolytes – much needed as we do not yet have a standard electrolyte readily plating and stripping calcium. From ...
ArtikelHalogen‐Rich Lithium Argyrodite Solid‐State Electrolytes: A Reviewvon Linfeng Peng et al. · 06.03.2023 All about halogen-rich electrolytes: The crystal structure, chemical compositions, ion conduction mechanism, synthesis methods, modification strategies, and applications of halogen-rich lithium argyrodite solid-state electrolytes in all-solid-state ...
ArtikelIntercalation Reaction of Molybdenum Trioxide Cathode for Rechargeable Ion Batteriesvon Dawei Sheng et al. · 06.03.2023Based on the intercalation reaction, molybdenum trioxide has become an attractive cathode material for rechargeable ion batteries owing to its high theoretical capacity and layered structure. This review summarizes the recent research progress of mol...
ArtikelAmbipolar Electrochemistry of Pre‐Intercalated Ti3C2T x MXene in Ionic Liquid Electrolytevon Geetha Valurouthu et al. · 06.03.2023Cation intercalation with or without redox remains the dominant charge storage mechanism for two-dimensional (2D) Ti3C2T x MXene. Anion-based charge storage remains unexplored due to intrinsic negative surface charge of MXenes preventing spontaneous...
ArtikelPolyphosphazene Based Inorganic‐Organic Hybrid Cathode Containing Pyrene Tetraone Sides for Aqueous Zinc‐Ion Batteriesvon Selin Sariyer et al. · 03.03.2023 Cathodes for aqueous zinc-ion batteries: The electrochemical performance of poly[(bis(2-amino-4,5,9,10-pyrenetetraone)] electrode in zinc sulfate electrolyte demonstrated very stable discharge/charge cycling process. In-situ EQCM and visualization o...
ArtikelFlexible Gel Polymer Electrolytes Based on Carboxymethyl Cellulose Blended with Polyvinyl Alcohol or Polyacrylic Acid for Zinc‐Air Batteriesvon Estibaliz García‐Gaitán et al. · 03.03.2023 Flexible electrolytes for zinc-air batteries: The stability of CMC membranes can be enhanced both electrochemical and mechanically doped with PAA polymer in an ex-situ process. This shows a larger and more stable plateau, higher potential and avoidi...
ArtikelHigh Active Material Loading in Organic Electrodes Enabled by an in‐situ Electropolymerized π‐Conjugated Tetrakis (4‐Aminophenyl) Porphyrinvon Thomas Smok et al. · 03.03.2023 New Porphyrin Cathode Material: An aminophenyl-porphyrin was examined in lithium half cells exhibiting excellent cycling stability and high discharge capacities. Through implementation of Cu-atom into the central cavity of porphyrins, a “sheet-like”...
ArtikelHigh‐Energy‐Density Graphene Hybrid Flexible Fiber Supercapacitorsvon Yifan Zhou et al. · 02.03.2023 Fiber-like supercapacitors: AgI/PEDOT : PSS/RGO composite fibers were prepared through wet spinning and surface growth. The interlayer π–π stacking and hydrogen bonding between PEDOT : PSS and RGO sheets give rise to strength and electrical conducti...
ArtikelUnderstanding the electrochemical and interfacial behaviour of sulfolane‐based electrolytes in LiNi0.5Mn1.5O4‐graphite full‐cellsvon Girish et al. · 02.03.2023An ethylene carbonate-free electrolyte composed of 1 M lithium bis(fluorosulfonyl) imide (LiFSI) in sulfolane (SL) is studied here for LiNi0.5Mn1.5O4-graphite full-cells. An important focus on the evaluation of the anodic stability of the SL electrol...
ArtikelEnhanced Cycling Stability of Lithium‐Rich Cathode Materials Achieved by in‐situ Formation of LiErO2 Coatingvon Zhicheng Wei et al. · 01.03.2023 Towards long cycle life: Lithium-rich manganese-based cathode materials are considered ideal for next-generation lithium-ion power batteries due to their high specific capacity. In this paper, the surface of Li-rich layered oxide (LLO) material is u...
ArtikelTunnel‐Type Na2Ti6O13@Carbon Nanowires as Anode Materials for Low‐Temperature Sodium‐Ion Batteriesvon Qing‐Song Lai et al. · 01.03.2023 A novel low-temperature anode: One-dimensional tunnel-type structured Na2Ti6O13@C nanowires were synthesized and utilized as anode material for low-temperature sodium-ion batteries. The appropriate interlayer spacing for sodium ion insertion/extract...
ArtikelQuantitative Cell Classification Based on Calibrated Impedance Spectroscopy and Metrological Uncertaintyvon Amin Moradpour et al. · 28.02.2023 Uncertainty and calibration data are used to aid cell classification. A confidence level and a two-dimensional error bound visualization are presented based on the impedance covariance matrix. Abstract Electrochemical impedance spectroscopy (EIS) ...
ArtikelElectrolyte Modulation Strategies for High Performance Zn Batteriesvon Mingming Han et al. · 28.02.2023With high safety and low-cost features, aqueous Zn batteries have become the promising rechargeable battery technology for future. Recent research works reached a deep understanding on the underlying electrolyte chemistry in Zn batteries. This review...
ArtikelZincophilic Design and the Electrode/Electrolyte Interface for Aqueous Zinc‐Ion Batteries: A Reviewvon Chenyang Zhao et al. · 23.02.2023 Zincophilicity of the anode/electrolyte interface is critical to the stable and safe operation of aqueous zinc-ion batteries. This review presents a comprehensive summary on several factors affecting the zincophilicity of the interface of electrode/...
ArtikelThe Progress and Comprehensive Analysis of Supercapacitors for Alternating Current Line Filtering: A Reviewvon Shuting Zhang et al. · 17.02.2023 Advances in ultrafast Supercapacitors are summarized from five perspectives and evaluated for practical AC filtering applications. The specific capacitance of ultrafast SCs is extremely better than that of AECs, beneficial for the needs ofsmall and ...
ArtikelSolution‐Processed Synthesis of Nano‐Sized Argyrodite Solid Electrolytes with Cavitation Effect for High Performance All‐Solid‐State Lithium‐Ion Batteriesvon Youngjun Huh et al. · 15.02.2023 Small particles larger contacts: Comparison of lithium-ion conducting pathway at cathode electrode and charge-discharge electrochemical performances of lithium half cell according to solid electrolyte synthesis process of ball milling (BM) and solve...
ArtikelStructural, Morphological and Interfacial Investigation of H2V3O8 upon Mg2+ Intercalationvon Yuri Surace et al. · 14.02.2023 Mg2+ intercalation in H2V3O8 : Post-mortem analysis at different charge and discharge states and selected cycle numbers of H2V3O8, a promising cathode material for Mg-ion batteries, reveals partially reversible changes in the crystal structure upon ...
ArtikelEfficient Low Temperature Performance of All Solid‐State Zinc‐Air Batteries with MnCo2O4/Carbon Fiber Bifunctional Electrocatalyst and Poly(Acrylic Acid) (PAA) Gel Polymer Electrolytevon Zahra Abedi et al. · 14.02.2023 Low temperature all solid-state zinc-air batteries: MnCo2O4 coated carbon fibers were used to prepare a highly efficient homemade air electrode for all solid state zinc-air batteries with PAA-KOH gel polymer electrolyte. The battery performance was ...
ArtikelInterplay between Elastic and Electrochemical Properties during Active Material Transitions and Aging of a Lithium‐Ion Batteryvon Simon Feiler et al. · 14.02.2023 Revealing the changes of mechanical property: The overall effective Young's modulus of the lithium-ion battery, measured by ultrasonic time of flight and dilation measurements, decreases by ∼11 %–12 % over the course of 1000 cycles. The link between...
ArtikelA Review of Polymer‐based Solid‐State Electrolytes for Lithium‐Metal Batteries: Structure, Kinetic, Interface Stability, and Applicationvon Xiaoxue Zhao et al. · 10.02.2023 Polymer-based electrolyte: This review provided a comprehensive overview of the principles, modification strategy, and prospects of polymer-based solid-state electrolytes from recent research on molecular design, ceramic/polymer composite, and inter...
ArtikelToward High Energy Density FeFx (x=2 and 3) Cathodes for Lithium‐Ion Batteriesvon Jun Li et al. · 09.02.2023 Conversion iron-bases fluorides: This review focuses on the multi-electron conversion processes of FeF x cathodes and synthetic fluorination routes utilizing different types of fluorine sources. More importantly, the scientific strategies of enh...
ArtikelBalancing Partial Ionic and Electronic Transport for Optimized Cathode Utilization of High‐Voltage LiMn2O4/Li3InCl6 Solid‐State Batteriesvon Theodoor A. et al. · 08.02.2023 Balanced ions/electrons transport: Optimal performance and capacity in solid-state batteries with a composite cathode can only be achieved when the transport within is optimized to be balanced. This work shows that both DC polarization and transmiss...
ArtikelCovalent Organic Frameworks as Emerging Battery Materialsvon Zhiqiang Wang et al. · 08.02.2023 All about COFs in battery applications: In this review, the chemical reactions, topology structure design and regulation methods of crystalline COFs were critically summarized. The application and electrochemical performance of COF electrode materia...
ArtikelAdvances in MoS2 based Hollow Structural Materials for High‐Performance Metal‐Ion Batteriesvon Hui Zhang et al. · 08.02.2023 The design of MoS2 based electrode materials with different dimension structure for metal ion battery could promote more active sites and shorten diffusion path of ion, constrain the stack of 2D MoS2 and relieve volume expansion, which provides a co...
ArtikelAn Aqueous Manganese‐Ion Battery with NaV6O15/C Microrods as a Stable Mn2+ Storage Hostvon Vaiyapuri Soundharrajan et al. · 07.02.2023 Carbon-coated NaV6O15 microrods are established as a robust cathode for aqueous manganese-ion batteries. Abstract Manganese-ion batteries (MIBs) involving aqueous electrolytes are regarded as next-generation energy-storage systems for utilization ...
ArtikelOriented‐Etched Graphite for Low‐Temperature Lithium‐Ion Batteriesvon Jiang Xu et al. · 07.02.2023 Macropores for lithium transportation: An electrode-electrolyte strategy combining oriented-etched macroporous graphite with 1,3-dioxolane-based electrolyte is designed to improve the migration of Li+/Li at the electrolyte-electrode interface and in...
ArtikelThionin as a Bipolar Organic Cathode Material for Aqueous Rechargeable Zinc Batteriesvon Pu Yu et al. · 06.02.2023 Bipolar ion storage: Thionin (Thn-CH3COO), a biological dye, can be also used as a high-performance bipolar-type organic cathode material for aqueous rechargeable zinc batteries. In the Zn(CF3SO3)2 electrolyte, both CH3COO− and CF3SO3 − anions parti...
ArtikelInvestigation of Synthesis, Electrochemistry and Thermal Stability of High‐energy Ball‐milled Si‐based Alloy Anodes in Lithium‐ion Batteriesvon Zhang Xingyu et al. · 23.01.2023The fast capacity fading of Si-based anodes significantly limits the application in Li-ion battery (LIB) industries. With the co-introduction of metal and oxygen elements proven to be effective, although Si-CuO composites are reported to be cost effe...
